Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 C1 Wireless-N300 router. In the bottom part of this site, you will find a manual for accessing the router’s user interface.
Configure the LAN IP of RT-N12. The DHCP Server dynamically changes the IP pool when you change the LAN IP. IP Address: Subnet Mask: RT-N12. SSID: Firmware Version: 1.0.0.6 Operation Mode: Router: Language Logout. Reboot: Network Map.
Login data for the user interface
The RT-N12 is a 300Mbps Wireless N Router with both wired and wireless network connections designed specifically for small business and home office networking use. With 2T2R MIMO Technology and two detachable 5dBi high gain antennas, the RT-N12 creates a an extended coverage area with advanced wireless performance, making it ideal for streaming. Home; ASUS; RT-N12 D1; Default settings of the ASUS RT-N12 D1. Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 D1 Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of. Asus - RT-AC55U. Ip Address: 192.168.1.1. Password: admin. Login to the router with the default IP addresse 192.168.1.1 and then use the username. Look in the left column of the Asus router password list below to find your Asus router model number. Find Your Asus Router Username. Look one column to the right of your router model number to see your Asus router's user name. Find Your Asus Router Password. You know the drill. Look another column to the right to find your Asus router's.
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12 C1, you have to do the following steps for access:
- Put router into operation
- Connect the device and router
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12HP Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
Asus Rt N12 Router Password
Preconfigured Wi-Fi settings
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12HP, you have to do the following steps for access:
- Switch on router
- Connect the device via Wi-Fi* or a network cable with the router
- Open web browser
- Enter IP address in the address bar and then confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
Asus Rt N12 Set Up
* Make sure that your router’s Wi-Fi is activated.
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the ASUS RT-N12HP to its default settings, you have to do the following steps:
- Turn on router
- For at least 6 seconds, press the Reset button
- Device is automatically restarted
- Router has been reset to factory settings
Execute software reset
With the ASUS RT-N12HP, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
Asus Rt N12 Setup Guide
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.